Ifilimu ye-CPP Metallized
Intshayelelo yeMveliso:
Le filimu ine-metallic gloss eqaqambileyo, iipropati ezibalaseleyo zokuthintela igesi kunye nokukhanya, kunye nokumelana nokufuma okuphezulu kunye nokusebenza kokuthintela ukukhanya. Ingasebenza njengendawo yefoyile ye-aluminium kwizicelo ezahlukeneyo.
Izicelo zeMveliso:
Isetyenziswa kakhulu kwiinkqubo zokuprinta kunye ne-lamination, kwaye emva kwe-lamination, ingasetyenziselwa ukupakisha okuguquguqukayo, ukupakisha ukutya, iibhaluni, iithoyi, nokunye.
Iinkcukacha:
- **Ubukhulu**: Ngokwesiqhelo yi-25 μm, inokwenziwa ngokwezifiso ngokusekelwe kwiimfuno zabathengi.
Iimpawu eziqhelekileyo:
| Into yoVavanyo | Imfuneko Esemgangathweni | Ixabiso Eliqhelekileyo |
| Amandla okuThamba (MPa) |
|
|
| - I-Longitudinal | I-VMCPP: ≥35 | ≥35 |
| - I-Transverse | I-VMCPP: ≥25 | ≥25 |
| Ukwandiswa ngexesha lokuphumla (%) |
|
|
| - I-Longitudinal | I-VMCPP: ≥350 | ≥350 |
| - I-Transverse | I-VMCPP: ≥450 | ≥450 |
| Izinga lokuncipha kobushushu (%) |
|
|
| - I-Longitudinal | ≤5% | ≤6% |
| I-Coefficient of Friction |
|
|
| - Umgangatho ongaguqukiyo (ongaguqukiyo) | ≤0.8 | ≤0.7 |
| - Utshintsho (umphezulu ongengowesinyithi) | ≤0.8 | ≤0.7 |
| Ubushushu beSitywino soBushushu (8N/15mm) |
|
|
| - Umphezulu oNsimbi | 8N/15mm
| 110±1°C |
| Uxinzelelo lokumanzisa (mN/m) |
|
|
| - Umphezulu oNsimbi | I-VMCPP: ≥36 | ≥36 |
| Isantya Sokudluliselwa Komphunga Wamanzi (WVTR) | I-VMCPP: ≤2.5 g/m²·24h | ≤2.5 g/m² iiyure ezingama-24 |
| Izinga lokuThunyelwa kweOksijini (OTR) | I-VMCPP: ≤250 cm³/m²·24h·0.1MPa | ≤250 cm³/m²·24h·0.1MPa |