Fim ɗin Rufi Mai Rufi Mai Rufi Mai Kyau na PET
Gabatarwar Samfuri:
Ta hanyar amfani da fasahar Alubond, wannan fim ɗin yana ɗauke da murfin aluminum mai mannewa sosai tare da kyawawan halaye na shinge, wanda ke ƙara ƙamshi da kuma riƙe sabo yayin da yake tsawaita lokacin da za a ajiye shi. Hakanan yana ba da kyakkyawan aiki a bugu da lamination.
Aikace-aikacen Samfura:
Ana amfani da shi sosai a cikin marufi mai haɗawa don abinci, magunguna, kayan kwalliya, da sauran aikace-aikace.
Tsarin Tsarin:
Maganin PET / Rufin Sama Mai Rufi (Layin Iri na Alubond ko Rufin) / Rufin Aluminum.
Bayani dalla-dalla:
- Kauri na Kayan Tushe: 6–80 μm
- Faɗi da Girma: Ana iya keɓance shi bisa ga buƙatun abokin ciniki.
Halaye na yau da kullun:
| Kayan Gwaji | Hanyar Gwaji | Naúrar | VMPET-GF0 | VMPET-GF1 |
| Kauri Kayan Tushe | GB/T 6672 | μm | 12 | 12 |
| Kauri na Rufin Aluminum | GB/T 15717 | NA | 2.0 | 2.0 |
| Yawan yawa | GB/T 1033.1 | g/cm³ | 1.4 | 1.4 |
| Mannewa na Layer na Aluminum | Hanyar Gwajin EAA | N/15mm | 2.0 | 3.0 |
| Jinkirin Jikewa (Surface Mai Rufi Da Aluminum) | GB/T 14216 | mN/m | ≥48 | ≥48 |
| Jinkirin Jikewa (Siffofin da ba a Rufe da Aluminum ba) | GB/T 14216 | mN/m | ≥40 | ≥40 |
| Ƙarfin Tashin Hankali (MD mai tsayi) | GB/T 1040.3 | MPa | ≥170 | ≥170 |
| Ƙarfin Taurin Kai (Tsayawa TD) | GB/T 1040.3 | MPa | ≥170 | ≥170 |
| Ƙarawa a Hutu (Dogon MD) | GB/T 1040.3 | % | ≤200 | ≤200 |
| Ƙarawa a Hutu (Transverse TD) | GB/T 1040.3 | % | ≤200 | ≤200 |
| Yawan Yaɗa Tururin Ruwa (WVTR) | ASTM F-1249 | g/(m²·24h) | ≤1.5 | ≤1.0 |
| Yawan Watsa Iskar Oxygen (OTR) | ASTM D-3985 | cm³/(m²·24h·0.1MPa) | ≤1.5 | ≤1.0 |