Fim ɗin Aluminum mai Rufi Mai Babban Shafi na BOPP
Gabatarwar Samfuri:
Wannan fim ɗin yana da kyakkyawan mannewa na yadudduka na aluminum, wanda ke ƙara ƙarfin haɗin gwiwa tare da sauran kayan. An tsara shi don amfani da shi azaman Layer na tsakiya a cikin tsarin layuka uku, yana haɓaka daidaiton kayan. Fim ɗin yana ba da ingantaccen halayen iskar oxygen da shara, yana tsawaita tsawon lokacin shiryawa yadda ya kamata.
Aikace-aikacen Samfura:
Tare da tasirin walƙiyar ƙarfe, yana hana fallasa ga hasken da ake iya gani da hasken ultraviolet, yana tsawaita tsawon lokacin da kayayyakin da aka shirya za su yi aiki. Fim ɗin kuma yana ba da ingantaccen aikin sarrafawa da kuma sake amfani da shi wanda ba ya cutar da muhalli. Ana amfani da shi sosai a cikin marufi na busassun 'ya'yan itatuwa, shayi, abinci mai bushewa, magunguna, da sauransu.
Tsarin Tsarin:
BOPP / Maganin saman da aka shafa (Layin Iri na Alubond ko Shafi) / Layin Aluminum
Bayani dalla-dalla:
- Kauri na Kayan Tushe: 12–50 μm
- Faɗi da Girma: Ana iya keɓance shi bisa ga buƙatun abokin ciniki.
Halaye na yau da kullun:
| Kayan Gwaji | Hanyar Gwaji | Naúrar | VMOPP-GZ010 | VMOPP-GZ110 | VMOPP-GZ111 |
| Kauri Kayan Tushe | GB/T 6672 | μm | 18 | 18 | 18 |
| Kauri na Rufin Aluminum | GB/T 15717 | NA | ≥2.2 | ≥2.4 | ≥2.4 |
| Mannewa na Layer na Aluminum | Hanyar Gwajin EAA | N/15mm | ≥2.0 | ≥3.0 | ≥3.0 |
| Jinkirin Jikewa (Surface Mai Rufi Da Aluminum) | GB/T 14216 | mN/m | ≥40 | ≥40 | ≥40 |
| Jinkirin Jikewa (Siffofin da ba a Rufe da Aluminum ba) | GB/T 14216 | mN/m | ≥36 | ≥36 | ≥36 |
| Ƙarfin Taurin Kai (MD) | GB/T 1040.3 | MPa | ≥120 | ≥120 | ≥120 |
| Ƙarfin Taurin Kai (TD) | GB/T 1040.3 | MPa | ≥200 | ≥200 | ≥200 |
| Ƙarawa a Hutu (MD) | GB/T 1040.3 | % | ≤180 | ≤180 | ≤180 |
| Ƙarawa a Hutu (TD) | GB/T 1040.3 | % | ≤65 | ≤65 | ≤65 |
| Yawan Yaɗa Tururin Ruwa (WVTR) | ASTM F-1249 | g/(m²·24h) | ≤1.0 | ≤0.8 | ≤0.5 |
| Yawan Watsa Iskar Oxygen (OTR) | ASTM D-3985 | cm³/(m²·24h·0.1MPa) | ≤1.0 | ≤0.5 | ≤0.3 |