HLH-107 Corrosion Inhibitor and Scorch Inhibitor

• Comprehensive Corrosion Protection: Forms a dense protective film on metal surfaces, effectively reducing Fe²⁺ levels in recovery tower drainage to ≤1mg/L.
• Furoic Acid Neutralization: Forms a complex with furoic acid, disrupting its azeotropic behavior with furfural, which reduces the acid value of circulating furfural.
• Coking Suppression: Slows down furfural condensation reactions, minimizing coking tendencies and maintaining system cleanliness.
• Oxidation Inhibition: Alleviates the oxidation of furfural by dissolved oxygen and air, preserving furfural quality and system integrity.
• Longer Operational Cycles: Extends the operating cycle of refining units from less than 1 year to over 5 years, reducing maintenance frequency and solvent consumption.
• Environmental Safety: Post-use, the product enters the water phase, ensuring no impact on lubricating oil quality or subsequent wastewater treatment processes.

Specifically designed for lubricating oil furfural refining units to inhibit furfural oxidation, reduce corrosion, and slow down coking tendencies.

1.Pump BXH-107 into a storage tank. It can be used as a pure solution or diluted with deoxygenated water.
2.Inject the solution at the feed pump of the furfural recovery dehydration tower and the inlet of the furfural water layer tank.
3.Standard dosage: 20–30ppm (based on raw material oil).
4.Control the pH of recovery tower drainage to 5.5–6.5.
5.During the first 2–3 weeks of operation, double the dosage to form a robust protective film on equipment surfaces.

• Packaging: Packed in 200L plastic barrels, net weight 200kg per barrel.
• Storage: Store in a cool, dry, and ventilated area at room temperature. Ensure the container is sealed. Shelf life: 1 year.
• Safety: Non-flammable. Transport according to general chemical safety standards. Refer to the Material Safety Data Sheet (MSDS) for additional information.