Ifilimu ene-High-Barrier PET Aluminium Oxide-Coated Film
Intshayelelo yeMveliso:
Le filimu ine-aluminium layer ephezulu yokunamathela kunye nokusebenza kakuhle kwe-composite, okwenza ifaneleke ukusetyenziswa njengomaleko ophakathi kwiindawo zokubilisa. Inika iipropati eziphezulu zokuthintela (ukufuma, ioksijini, kunye nokugcinwa kwevumba), ukukhanya okuphezulu kunye nokuhanjiswa kokukhanya kwe-≥87%, kwaye iyakwazi ukubulala iintsholongwane kwi-microwave. Ukongeza, inokubonwa zizixhobo zokubona isinyithi.
Izicelo zeMveliso:
- **Ukupakisha Ukutya**: Ifanelekile kwiibhisikithi, izidlo zokutya, ukupakisha ukutya kwezilwanyana zasekhaya.
- **Ukupakisha kwe-elektroniki**.
- **Ukupakisha Ulwelo**.
- **Ukupakisha Okubilisiweyo Nokunokutsalwa Kwi-Microwave**.
Ulwakhiwo lweNkqubo:
Umaleko we-PET / i-aluminium oxide / Ukwaleka
Iinkcukacha:
- Ubukhulu bezinto ezisisiseko: 6–50 μm
- Ububanzi kunye nobukhulu: Ingenziwa ngokwezifiso ngokusekelwe kwiimfuno zabathengi.
Iimpawu eziqhelekileyo:
| Into yoVavanyo | Indlela yoVavanyo | Iyunithi | I-PET-ALOX010 | I-PET-ALOX110 | I-PET-ALOX011 | I-PET-ALOX111 |
| Ubukhulu bezinto ezisisiseko | GB/T 6672 | μm | 12 | 12 | 12 | 12 |
| Ubukhulu beAluminiyam Coating | GB/T 15717 | YE | ≥0.09 | ≥0.09 | ≥0.09 | ≥0.09 |
| Ukunamathela kwi-Aluminium Layer | Indlela yoVavanyo lwe-EAA | N/15mm | ≥2.0 | ≥2.0 | ≥2.0 | ≥2.0 |
| Uxinzelelo lokumanzisa (Umphezulu ogqunywe yi-Aluminiyam) | GB/T 14216 | mN/m | ≥40 | ≥40 | ≥40 | ≥40 |
| Uxinzelelo lokumanzisa (Umphezulu ongagqunywanga yi-aluminium) | GB/T 14216 | mN/m | ≥36 | ≥36 | ≥36 | ≥36 |
| Amandla okuThamba (MD) | GB/T 1040.3 | I-MPa | ≥170 | ≥170 | ≥170 | ≥170 |
| Amandla okuThamba (TD) | GB/T 1040.3 | I-MPa | ≥170 | ≥170 | ≥170 | ≥170 |
| Ukwandiswa kwi-Break (MD) | GB/T 1040.3 | % | ≤200 | ≤200 | ≤200 | ≤200 |
| Ukwandiswa ngexesha lokuphumla (TD) | GB/T 1040.3 | % | ≤200 | ≤200 | ≤200 | ≤200 |
| Isantya Sokudluliselwa Komphunga Wamanzi (WVTR) | I-ASTM F-1249 | g/(m²·24h) | ≤2.0 | ≤1.0 | ≤0.8 | ≤0.5 |
| Izinga lokuThunyelwa kweOksijini (OTR) | I-ASTM D-3985 | cm³/(m²·24h·0.1MPa) | ≤2.0 | ≤1.0 | ≤0.5 | ≤0.3 |